CB750 High Performance Programmable Ignition PLC Cable

The PLC (Program Link Cable) is used to program all IDS ignitions.

The rectangular end (DB9 connector) is connected to the serial port* located on the back of your computer. The round end (6 pin mini-din connector) attaches to the ignition. Before an ignition can be programmed the IDS application must be configured. You can down load the program here.

* If you do not have a serial port you will have to purchase a USB to Serial Adapter. Many newer laptops do not have serial ports. You can find USB to Serial Adapters at most computer or electronics stores.

Ask a question about this product